gold Scaffolds Assembly Scaffolds (Supercontigs) Mapping and Sequencing Description This track shows the draft assembly of the C. brenneri genome. The assembly is 9.5X WGS coverage. The 10,292 supercontigs are displayed in the UCSC Genome browser as a single artifical chromosome chrUn with an artifical gap of 1,000 N's between supercontigs. The largest supercontig is 1,129,006, with 478 supercontigs larger than 93,185 bp (N50) containing over %50 of the sequence. In dense mode, this track depicts the supercontigs. Supercontig boundaries are distinguished by the use of alternating gold and brown coloration. Arbitrary 1000 base gaps exist between the supercontigs, shown as spaces between the gold and brown blocks. All components within this track are of fragment type "W": Whole Genome Shotgun contig. Credits The Jan. 2007 Caenorhabditis brenneri (aka: Caenorhabditis n. sp. 4. PB2801) draft assembly produced by Washington University School of Medicine GSC with the following data usage policy. As described at WormBase: "This is a 20X inbred (one gravid female per generation) derivative of LKC28, which is conspecific with CB5161." Recently renamed to C. brenneri. Other conspecific strains: SB129, SB280. See also: Zootaxa 1456: 45-62 (25 Apr. 2007), Walter Sudhaus and Karin Kiontke. 
ctgPos2 Contigs Assembly Contigs Mapping and Sequencing Description This track shows the contigs used to assemble the supercontigs in the draft assembly of the C. brenneri genome. The assembly is 9.5X WGS coverage. The 10,292 supercontigs are displayed in the UCSC Genome browser as a single artifical chromosome chrUn with an artifical gap of 1,000 N's between supercontigs. The largest supercontig is 1,129,006, with 478 supercontigs larger than 93,185 bp (N50) containing over %50 of the sequence. Credits The Jan. 2007 Caenorhabditis brenneri (aka: Caenorhabditis n. sp. 4. PB2801) draft assembly produced by Washington University School of Medicine GSC with the following data usage policy. As described at WormBase: "This is a 20X inbred (one gravid female per generation) derivative of LKC28, which is conspecific with CB5161." Recently renamed to C. brenneri. Other conspecific strains: SB129, SB280. See also: Zootaxa 1456: 45-62 (25 Apr. 2007), Walter Sudhaus and Karin Kiontke. 
augustusGene AUGUSTUS AUGUSTUS ab initio gene predictions v3.1 Genes and Gene Predictions Description This track shows ab initio predictions from the program AUGUSTUS (version 3.1). The predictions are based on the genome sequence alone. For more information on the different gene tracks, see our Genes FAQ. Methods Statistical signal models were built for splice sites, branch-point patterns, translation start sites, and the poly-A signal. Furthermore, models were built for the sequence content of protein-coding and non-coding regions as well as for the length distributions of different exon and intron types. Detailed descriptions of most of these different models can be found in Mario Stanke's dissertation. This track shows the most likely gene structure according to a Semi-Markov Conditional Random Field model. Alternative splicing transcripts were obtained with a sampling algorithm (--alternatives-from-sampling=true --sample=100 --minexonintronprob=0.2 --minmeanexonintronprob=0.5 --maxtracks=3 --temperature=2). The different models used by Augustus were trained on a number of different species-specific gene sets, which included 1000-2000 training gene structures. The --species option allows one to choose the species used for training the models. Different training species were used for the --species option when generating these predictions for different groups of assemblies. Assembly Group Training Species Fish zebrafish Birds chicken Human and all other vertebrates human Nematodes caenorhabditis Drosophila fly A. mellifera honeybee1 A. gambiae culex S. cerevisiae saccharomyces This table describes which training species was used for a particular group of assemblies. When available, the closest related training species was used. Credits Thanks to the Stanke lab for providing the AUGUSTUS program. The training for the chicken version was done by Stefanie König and the training for the human and zebrafish versions was done by Mario Stanke. References Stanke M, Diekhans M, Baertsch R, Haussler D. Using native and syntenically mapped cDNA alignments to improve de novo gene finding. Bioinformatics. 2008 Mar 1;24(5):637-44. PMID: 18218656 Stanke M, Waack S. Gene prediction with a hidden Markov model and a new intron submodel. Bioinformatics. 2003 Oct;19 Suppl 2:ii215-25. PMID: 14534192 
mrna C. brenneri mRNAs C. brenneri mRNAs from GenBank mRNA and EST Description The mRNA track shows alignments between C. brenneri mRNAs in GenBank and the genome. Display Conventions and Configuration This track follows the display conventions for PSL alignment tracks. In dense display mode, the items that are more darkly shaded indicate matches of better quality. The description page for this track has a filter that can be used to change the display mode, alter the color, and include/exclude a subset of items within the track. This may be helpful when many items are shown in the track display, especially when only some are relevant to the current task. To use the filter: Type a term in one or more of the text boxes to filter the mRNA display. For example, to apply the filter to all mRNAs expressed in a specific organ, type the name of the organ in the tissue box. To view the list of valid terms for each text box, consult the table in the Table Browser that corresponds to the factor on which you wish to filter. For example, the "tissue" table contains all the types of tissues that can be entered into the tissue text box. Wildcards may also be used in the filter. If filtering on more than one value, choose the desired combination logic. If "and" is selected, only mRNAs that match all filter criteria will be highlighted. If "or" is selected, mRNAs that match any one of the filter criteria will be highlighted. Choose the color or display characteristic that should be used to highlight or include/exclude the filtered items. If "exclude" is chosen, the browser will not display mRNAs that match the filter criteria. If "include" is selected, the browser will display only those mRNAs that match the filter criteria. This track may also be configured to display codon coloring, a feature that allows the user to quickly compare mRNAs against the genomic sequence. For more information about this option, go to the Codon and Base Coloring for Alignment Tracks page. Methods GenBank C. brenneri mRNAs were aligned against the genome using the blat program. When a single mRNA aligned in multiple places, the alignment having the highest base identity was found. Only alignments having a base identity level within 0.5% of the best and at least 96% base identity with the genomic sequence were kept. Credits The mRNA track was produced at UCSC from mRNA sequence data submitted to the international public sequence databases by scientists worldwide. References Benson DA, Karsch-Mizrachi I, Lipman DJ, Ostell J, Wheeler DL. GenBank: update. Nucleic Acids Res. 2004 Jan 1;32(Database issue):D23-6. PMID: 14681350; PMC: PMC308779 Kent WJ. BLAT - the BLAST-like alignment tool. Genome Res. 2002 Apr;12(4):656-64. PMID: 11932250; PMC: PMC187518 
gap Gap Gap Locations Mapping and Sequencing Description This track depicts gaps in the assembly. Gaps are represented as black boxes in this track. If the relative order and orientation of the contigs on either side of the gap is supported by read pair data, it is a bridged gap and a white line is drawn through the black box representing the gap. This assembly contains the following two types of gaps: fragment - gaps between the Whole Genome Shotgun contigs of a supercontig/scaffold. (In this context, a contig is a set of overlapping sequence reads. A supercontig/scaffold is a set of contigs ordered and oriented during the Whole Genome Shotgun process using paired-end reads.) These are represented by varying numbers of Ns in the assembly. Fragment gap sizes are usually taken from read pair data. scaffold - gaps between supercontigs not linked by the fingerprint map. These are represented by 1,000 Ns in the assembly of the artifical chromosome chrUn (concatenation of unplaced supercontigs). Credits The Jan. 2007 Caenorhabditis brenneri (aka: Caenorhabditis n. sp. 4. PB2801) draft assembly produced by Washington University School of Medicine GSC with the following data usage policy. As described at WormBase: "This is a 20X inbred (one gravid female per generation) derivative of LKC28, which is conspecific with CB5161." Recently renamed to C. brenneri. Other conspecific strains: SB129, SB280. See also: Zootaxa 1456: 45-62 (25 Apr. 2007), Walter Sudhaus and Karin Kiontke. 
gc5Base GC Percent GC Percent in 5-Base Windows Mapping and Sequencing Description The GC percent track shows the percentage of G (guanine) and C (cytosine) bases in 5-base windows. High GC content is typically associated with gene-rich areas. This track may be configured in a variety of ways to highlight different apsects of the displayed information. Click the "Graph configuration help" link for an explanation of the configuration options. Credits The data and presentation of this graph were prepared by Hiram Clawson. 
microsat Microsatellite Microsatellites - Di-nucleotide and Tri-nucleotide Repeats Variation and Repeats Description This track displays regions that are likely to be useful as microsatellite markers. These are sequences of at least 15 perfect di-nucleotide and tri-nucleotide repeats and tend to be highly polymorphic in the population. Methods The data shown in this track are a subset of the Simple Repeats track, selecting only those repeats of period 2 and 3, with 100% identity and no indels and with at least 15 copies of the repeat. The Simple Repeats track is created using the Tandem Repeats Finder. For more information about this program, see Benson (1999). Credits Tandem Repeats Finder was written by Gary Benson. References Benson G. Tandem repeats finder: a program to analyze DNA sequences. Nucleic Acids Res. 1999 Jan 15;27(2):573-80. PMID: 9862982; PMC: PMC148217 
xenoRefGene Other RefSeq Non-C. brenneri RefSeq Genes Genes and Gene Predictions Description This track shows known protein-coding and non-protein-coding genes for organisms other than C. brenneri, taken from the NCBI RNA reference sequences collection (RefSeq). The data underlying this track are updated weekly. Display Conventions and Configuration This track follows the display conventions for gene prediction tracks. The color shading indicates the level of review the RefSeq record has undergone: predicted (light), provisional (medium), reviewed (dark). The item labels and display colors of features within this track can be configured through the controls at the top of the track description page. Label: By default, items are labeled by gene name. Click the appropriate Label option to display the accession name instead of the gene name, show both the gene and accession names, or turn off the label completely. Codon coloring: This track contains an optional codon coloring feature that allows users to quickly validate and compare gene predictions. To display codon colors, select the genomic codons option from the Color track by codons pull-down menu. For more information about this feature, go to the Coloring Gene Predictions and Annotations by Codon page. Hide non-coding genes: By default, both the protein-coding and non-protein-coding genes are displayed. If you wish to see only the coding genes, click this box. Methods The RNAs were aligned against the C. brenneri genome using blat; those with an alignment of less than 15% were discarded. When a single RNA aligned in multiple places, the alignment having the highest base identity was identified. Only alignments having a base identity level within 0.5% of the best and at least 25% base identity with the genomic sequence were kept. Credits This track was produced at UCSC from RNA sequence data generated by scientists worldwide and curated by the NCBI RefSeq project. References Kent WJ. BLAT--the BLAST-like alignment tool. Genome Res. 2002 Apr;12(4):656-64. PMID: 11932250; PMC: PMC187518 Pruitt KD, Brown GR, Hiatt SM, Thibaud-Nissen F, Astashyn A, Ermolaeva O, Farrell CM, Hart J, Landrum MJ, McGarvey KM et al. RefSeq: an update on mammalian reference sequences. Nucleic Acids Res. 2014 Jan;42(Database issue):D756-63. PMID: 24259432; PMC: PMC3965018 Pruitt KD, Tatusova T, Maglott DR. NCBI Reference Sequence (RefSeq): a curated non-redundant sequence database of genomes, transcripts and proteins. Nucleic Acids Res. 2005 Jan 1;33(Database issue):D501-4. PMID: 15608248; PMC: PMC539979 
quality Quality Scores C. brenneri Sequencing Quality Scores Mapping and Sequencing Description The Quality Scores track shows the sequencing quality score of each base in the assembly. The height at each position of the track indicates the quality of the base. When zoomed out to a large range, the heights reflect the averaged scores. This track may be configured in a variety of ways to highlight different aspects of the displayed information. Click the Graph configuration help link for an explanation of the configuration options. Credits The quality scores were provided as part of the C. brenneri assembly. The database representation and graphical display code were written by Hiram Clawson. 
simpleRepeat Simple Repeats Simple Tandem Repeats by TRF Variation and Repeats Description This track displays simple tandem repeats (possibly imperfect repeats) located by Tandem Repeats Finder (TRF) which is specialized for this purpose. These repeats can occur within coding regions of genes and may be quite polymorphic. Repeat expansions are sometimes associated with specific diseases. Methods For more information about the TRF program, see Benson (1999). Credits TRF was written by Gary Benson. References Benson G. Tandem repeats finder: a program to analyze DNA sequences. Nucleic Acids Res. 1999 Jan 15;27(2):573-80. PMID: 9862982; PMC: PMC148217 
tRNAs tRNA Genes Transfer RNA Genes Identified with tRNAscan-SE Genes and Gene Predictions Description This track displays tRNA genes predicted by using tRNAscan-SE v.1.23. tRNAscan-SE is an integrated program that uses tRNAscan (Fichant) and an A/B box motif detection algorithm (Pavesi) as pre-filters to obtain an initial list of tRNA candidates. The program then filters these candidates with a covariance model-based search program COVE (Eddy) to obtain a highly specific set of primary sequence and secondary structure predictions that represent 99-100% of true tRNAs with a false positive rate of fewer than 1 per 15 gigabases. Detailed tRNA annotations for eukaryotes, bacteria, and archaea are available at Genomic tRNA Database (GtRNAdb). What does the tRNAscan-SE score mean? Anything with a score above 20 bits is likely to be derived from a tRNA, although this does not indicate whether the tRNA gene still encodes a functional tRNA molecule (i.e. tRNA-derived SINES probably do not function in the ribosome in translation). Vertebrate tRNAs with scores of >60.0 (bits) are likely to encode functional tRNA genes, and those with scores below ~45 have sequence or structural features that indicate they probably are no longer involved in translation. tRNAs with scores between 45-60 bits are in the "grey" zone, and may or may not have all the required features to be functional. In these cases, tRNAs should be inspected carefully for loss of specific primary or secondary structure features (usually in alignments with other genes of the same isotype), in order to make a better educated guess. These rough score range guides are not exact, nor are they based on specific biochemical studies of atypical tRNA features, so please treat them accordingly. Please note that tRNA genes marked as "Pseudo" are low scoring predictions that are mostly pseudogenes or tRNA-derived elements. These genes do not usually fold into a typical cloverleaf tRNA secondary structure and the provided images of the predicted secondary structures may appear rotated. Credits Both tRNAscan-SE and GtRNAdb are maintained by the Lowe Lab at UCSC. Cove-predicted tRNA secondary structures were rendered by NAVIEW (c) 1988 Robert E. Bruccoleri. References When making use of these data, please cite the following articles: Chan PP, Lowe TM. GtRNAdb: a database of transfer RNA genes detected in genomic sequence. Nucleic Acids Res. 2009 Jan;37(Database issue):D93-7. PMID: 18984615; PMC: PMC2686519 Eddy SR, Durbin R. RNA sequence analysis using covariance models. Nucleic Acids Res. 1994 Jun 11;22(11):2079-88. PMID: 8029015; PMC: PMC308124 Fichant GA, Burks C. Identifying potential tRNA genes in genomic DNA sequences. J Mol Biol. 1991 Aug 5;220(3):659-71. PMID: 1870126 Lowe TM, Eddy SR. tRNAscan-SE: a program for improved detection of transfer RNA genes in genomic sequence. Nucleic Acids Res. 1997 Mar 1;25(5):955-64. PMID: 9023104; PMC: PMC146525 Pavesi A, Conterio F, Bolchi A, Dieci G, Ottonello S. Identification of new eukaryotic tRNA genes in genomic DNA databases by a multistep weight matrix analysis of transcriptional control regions. Nucleic Acids Res. 1994 Apr 11;22(7):1247-56. PMID: 8165140; PMC: PMC523650 
windowmaskerSdust WM + SDust Genomic Intervals Masked by WindowMasker + SDust Variation and Repeats Description This track depicts masked sequence as determined by WindowMasker. The WindowMasker tool is included in the NCBI C++ toolkit. The source code for the entire toolkit is available from the NCBI FTP site. Methods To create this track, WindowMasker was run with the following parameters: windowmasker -mk_counts true -input caePb1.fa -output wm_counts windowmasker -ustat wm_counts -sdust true -input caePb1.fa -output repeats.bed The repeats.bed (BED3) file was loaded into the "windowmaskerSdust" table for this track. References Morgulis A, Gertz EM, Schäffer AA, Agarwala R. WindowMasker: window-based masker for sequenced genomes. Bioinformatics. 2006 Jan 15;22(2):134-41. PMID: 16287941 
chainPriPac1 P. pacificus Chain P. pacificus (Feb. 2007 (WUGSC 5.0/priPac1)) Chained Alignments Comparative Genomics Description This track shows alignments of P. pacificus (priPac1, Feb. 2007 (WUGSC 5.0/priPac1)) to the C. brenneri genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both P. pacificus and C. brenneri simultaneously. These "double-sided" gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the P. pacificus assembly or an insertion in the C. brenneri assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the C. brenneri genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the "pack" and "full" display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Display Conventions and Configuration By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the "off" button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Methods Transposons that have been inserted since the P. pacificus/C. brenneri split were removed from the assemblies. The abbreviated genomes were aligned with blastz using dynamic masking, and the transposons were then added back in. The resulting alignments were converted into psl format using the lavToPsl program. The axt alignments were fed into axtChain, which organizes all alignments between a single P. pacificus chromosome and a single C. brenneri chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used:  ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a threshold of 2000 were discarded; the remaining chains are displayed in this track. Credits Blastz was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Repeat areas we marked in the genome with WindowMasker as developed by: Morgulis A, Gertz EM, Schäffer AA, Agarwala R. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains were generated by Robert Baertsch and Jim Kent. References Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: Duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Morgulis A, Gertz EM, Schäffer AA, Agarwala R. WindowMasker: window-based masker for sequenced genomes. Bioinformatics. 2006 Jan 15;22(2):134-41. PMID: 16287941 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison R, Haussler D, Miller W. Human-Mouse Alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
netPriPac1 P. pacificus Net P. pacificus (Feb. 2007 (WUGSC 5.0/priPac1)) Alignment Net Comparative Genomics Description This track shows the best P. pacificus/C. brenneri chain for every part of the C. brenneri genome. It is useful for finding orthologous regions and for studying genome rearrangement. The P. pacificus sequence used in this annotation is from the Feb. 2007 (WUGSC 5.0/priPac1) (priPac1) assembly. Display Conventions and Configuration In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chains were derived from blastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. Blastz was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. The browser display and database storage of the nets were made by Robert Baertsch and Jim Kent. References Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: Duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison R, Haussler D, Miller W. Human-Mouse Alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainCb3 C. briggsae Chain C. briggsae (Jan. 2007 (WUGSC 1.0/cb3)) Chained Alignments Comparative Genomics Description This track shows alignments of C. briggsae (cb3, Jan. 2007 (WUGSC 1.0/cb3)) to the C. brenneri genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both C. briggsae and C. brenneri simultaneously. These "double-sided" gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the C. briggsae assembly or an insertion in the C. brenneri assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the C. brenneri genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the "pack" and "full" display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Display Conventions and Configuration By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the "off" button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Methods Transposons that have been inserted since the C. briggsae/C. brenneri split were removed from the assemblies. The abbreviated genomes were aligned with blastz using dynamic masking, and the transposons were then added back in. The resulting alignments were converted into psl format using the lavToPsl program. The axt alignments were fed into axtChain, which organizes all alignments between a single C. briggsae chromosome and a single C. brenneri chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used:  ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a threshold of 2000 were discarded; the remaining chains are displayed in this track. Credits Blastz was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Repeat areas we marked in the genome with WindowMasker as developed by: Morgulis A, Gertz EM, Schäffer AA, Agarwala R. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains were generated by Robert Baertsch and Jim Kent. References Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: Duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Morgulis A, Gertz EM, Schäffer AA, Agarwala R. WindowMasker: window-based masker for sequenced genomes. Bioinformatics. 2006 Jan 15;22(2):134-41. PMID: 16287941 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison R, Haussler D, Miller W. Human-Mouse Alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
netCb3 C. briggsae Net C. briggsae (Jan. 2007 (WUGSC 1.0/cb3)) Alignment Net Comparative Genomics Description This track shows the best C. briggsae/C. brenneri chain for every part of the C. brenneri genome. It is useful for finding orthologous regions and for studying genome rearrangement. The C. briggsae sequence used in this annotation is from the Jan. 2007 (WUGSC 1.0/cb3) (cb3) assembly. Display Conventions and Configuration In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chains were derived from blastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. Blastz was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. The browser display and database storage of the nets were made by Robert Baertsch and Jim Kent. References Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: Duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison R, Haussler D, Miller W. Human-Mouse Alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainCaeRem2 C. remanei Chain C. remanei (Mar. 2006 (WUGSC 1.0/caeRem2)) Chained Alignments Comparative Genomics Description This track shows alignments of C. remanei (caeRem2, Mar. 2006 (WUGSC 1.0/caeRem2)) to the C. brenneri genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both C. remanei and C. brenneri simultaneously. These "double-sided" gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the C. remanei assembly or an insertion in the C. brenneri assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the C. brenneri genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the "pack" and "full" display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Display Conventions and Configuration By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the "off" button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Methods Transposons that have been inserted since the C. remanei/C. brenneri split were removed from the assemblies. The abbreviated genomes were aligned with blastz using dynamic masking, and the transposons were then added back in. The resulting alignments were converted into psl format using the lavToPsl program. The axt alignments were fed into axtChain, which organizes all alignments between a single C. remanei chromosome and a single C. brenneri chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used:  ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a threshold of 2000 were discarded; the remaining chains are displayed in this track. Credits Blastz was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Repeat areas we marked in the genome with WindowMasker as developed by: Morgulis A, Gertz EM, Schäffer AA, Agarwala R. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains were generated by Robert Baertsch and Jim Kent. References Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: Duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Morgulis A, Gertz EM, Schäffer AA, Agarwala R. WindowMasker: window-based masker for sequenced genomes. Bioinformatics. 2006 Jan 15;22(2):134-41. PMID: 16287941 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison R, Haussler D, Miller W. Human-Mouse Alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
netCaeRem2 C. remanei Net C. remanei (Mar. 2006 (WUGSC 1.0/caeRem2)) Alignment Net Comparative Genomics Description This track shows the best C. remanei/C. brenneri chain for every part of the C. brenneri genome. It is useful for finding orthologous regions and for studying genome rearrangement. The C. remanei sequence used in this annotation is from the Mar. 2006 (WUGSC 1.0/caeRem2) (caeRem2) assembly. Display Conventions and Configuration In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chains were derived from blastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. Blastz was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. The browser display and database storage of the nets were made by Robert Baertsch and Jim Kent. References Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: Duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison R, Haussler D, Miller W. Human-Mouse Alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainCe4 ce4 Chain C. elegans (Jan. 2007 (WS170/ce4)) Chained Alignments Comparative Genomics Description This track shows alignments of C. elegans (ce4, Jan. 2007 (WS170/ce4)) to the C. brenneri genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both C. elegans and C. brenneri simultaneously. These "double-sided" gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the C. elegans assembly or an insertion in the C. brenneri assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the C. brenneri genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the "pack" and "full" display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Display Conventions and Configuration By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the "off" button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Methods Transposons that have been inserted since the C. elegans/C. brenneri split were removed from the assemblies. The abbreviated genomes were aligned with blastz using dynamic masking, and the transposons were then added back in. The resulting alignments were converted into psl format using the lavToPsl program. The axt alignments were fed into axtChain, which organizes all alignments between a single C. elegans chromosome and a single C. brenneri chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used:  ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a threshold of 2000 were discarded; the remaining chains are displayed in this track. Credits Blastz was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Repeat areas we marked in the genome with WindowMasker as developed by: Morgulis A, Gertz EM, Schäffer AA, Agarwala R. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains were generated by Robert Baertsch and Jim Kent. References Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: Duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Morgulis A, Gertz EM, Schäffer AA, Agarwala R. WindowMasker: window-based masker for sequenced genomes. Bioinformatics. 2006 Jan 15;22(2):134-41. PMID: 16287941 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-Mouse Alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
netCe4 ce4 Net C. elegans (Jan. 2007 (WS170/ce4)) Alignment Net Comparative Genomics Description This track shows the best C. elegans/C. brenneri chain for every part of the C. brenneri genome. It is useful for finding orthologous regions and for studying genome rearrangement. The C. elegans sequence used in this annotation is from the Jan. 2007 (WS170/ce4) (ce4) assembly. Display Conventions and Configuration In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chains were derived from blastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. Blastz was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. The browser display and database storage of the nets were made by Robert Baertsch and Jim Kent. References Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: Duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison R, Haussler D, Miller W. Human-Mouse Alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
rmsk RepeatMasker Repeating Elements by RepeatMasker Variation and Repeats Description This track was created by using Arian Smit's RepeatMasker program which screens DNA sequences for interspersed repeats and low complexity DNA sequences. The program outputs a detailed annotation of the repeats that are present in the query sequence (represented by this track) as well as a modified version of the query sequence in which all the annotated repeats have been masked (generally available on the Downloads page). RepeatMasker uses the Repbase Update library of repeats from the Genetic Information Research Institute (GIRI). Repbase Update is described in Jurka, J. (2000) in the References section below. Display Conventions and Configuration In full display mode, this track displays up to ten different classes of repeats: Short interspersed nuclear elements (SINE), which include ALUs Long interspersed nuclear elements (LINE) Long terminal repeat elements (LTR) which include retroposons DNA repeat elements (DNA) Simple repeats (micro-satellites) Low complexity repeats Satellite repeats RNA repeats (including RNA, tRNA, rRNA, snRNA, scRNA) Other repeats which includes class RC (Rolling Circle) Unknown The level of color shading in the graphical display reflects the amount of base mismatch, base deletion, and base insertion associated with a repeat element. The higher the combined number of these, the lighter the shading. Methods UCSC has used the most current versions of the RepeatMasker software and repeat libraries available to generate these data. Note that these versions may be newer than those that are publicly available on the Internet. Data are generated using the RepeatMasker -s flag. Additional flags may be used for certain organisms. Repeats are soft-masked. Alignments may extend through repeats, but are not permitted to initiate in them. See the FAQ for more information. Credits Thanks to Arian Smit, Robert Hubley and GIRI for providing the tools and repeat libraries used to generate this track. References Repbase Update is described in Jurka J. Repbase update: a database and an electronic journal of repetitive elements. Trends Genet. 2000 Sep;16(9):418-420. 
blastCe4SG C. elegans Proteins C. elegans Proteins WS170 Mapped by Chained tBLASTn Genes and Gene Predictions Description This track contains tBLASTn alignments of the peptides from the WormBase genes annotations on C. elegans version WS170 (UCSC ce4) Methods First, the predicted proteins from the C. elegans WormBase Genes track were aligned to the C. elegans genome using the blat program to discover exon boundaries. Next, the amino acid sequences that make up each exon were aligned with the C. brenneri sequence using the tBLASTn program. Finally, the putative C. brenneri exons were chained together using a maximum gap size of 50,000 but no gap penalty. The single best exon chains extending over more than 60% of the query protein were included. Exon chains that extended over 60% of the query and matched at least 60% of the protein's amino acids were also included. Credits tBLASTn is part of the NCBI Blast tool set. For more information on Blast, see Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ. Basic local alignment search tool. J Mol Biol. 1990 Oct 5;215(3):403-410. Blat was written by Jim Kent. The remaining utilities used to produce this track were written by Jim Kent, Brian Raney or Hiram Clawson.